2012年3月18日星期日

hey im looking for a SH Engine 28 for my truggy roller and i need a motor im not racing it or anything just flogging around my back yard or bmx track ive seen Sh engines all over ebay cheap as chips was just wondering if they are alright or not

http://www.hobbyhot.com/SH-ENGINES/

SH ENGINES Model 21 Nitro Engine 3.48cc for RC Car Buggy Truck Truggy EG635

2012年3月15日星期四

I just bought this Hobbywing brushless system from hobbyhot and it seems pretty good for the price. you get a 40mm x 68mm 2700kv motor and 120-amp speed control with fan, good up to 4s lipo. I bought the single motor plate and dust cover from the e-revo brushless edition and am using the stock 68 tooth spur gear with an 18 tooth pinion. I mounted the esc with double sided tape, but later found a plastic esc mount, 2-pinion gears, some shrink tubing and screws in the box. The kit also comes with a programming card. Seems like a very complete system and a great price for what you get.

2012年3月13日星期二

I just got a Hobbywing XeRun 4168SL 2250kV motor this week and must say it is very nice! The overall machining and build is virtually flawless. The front endbell is held in via 4x hex screws and the rear endbell is captured via 3x hex screws. The motor wires are more flexible and the insulation is also softer and more pliable. Overall, a much better looking motor compared to the previous EZRun 1/8-motors. The motor wires also exit through a black rubber piece almost identical to those used on Neu-Castles. Comparing it to my Neu-Castle, it looks just as nice and many characteristics look very similar or identical. I wouldn't be surprised if Hobbywing contracted the same mfr that makes CC's Neu-Castle motors.
Supposedly these new Hobbywing XeRun motors are 4-pole. I never got a response from HW when I emailed them to confirm that. So far, the specs shown on chinese RC forums and chinese vendors all say 4-pole. I somewhat doubt that still, but am hopeful they really are 4-poles. I haven't had a chance to install it yet, but hope to soon to check out the performance.
Volume-wise, these are slightly larger than the Tekin and Neu-Castle motors since those are 40x68 and this is 41x68.
I'd really like to get my hands on their larger 4274SL 2000kV motor. It's 42mm with the machined-in fins, but I believe it's a 41mm case also.

2012年3月11日星期日

Hobbywing is a factory in China, and she help other brand to rebrand, so called OEM.

The turnigy Plush and Guard esc's are Hobbywing Pentium and Sentry.
Hobbyking/city is rebranding Hobbywing. There is certainly nothing wrong with that as they are all outstanding controllers.

Just to add to this.

The volcano esc's sold from nitroplanes and hobbypartz are hobbywing esc's as well.

As are the Thunderpower esc's.

Same with the OEMRC and Emax ecs's.

All are hobbywing speed controllers.

Also Flightpower is selling rebranded hobbywing esc's under the "Flight Tech" name.

Additionally, the new line of speed controllers from Hobbywing, the Platinum's are sold by Hobbycity as the K-Force controller.

They are also sold by Nitroplanes and Hobbypartz as the Momentum controller.

There are many many more rebranded Hobbywing esc's out there.

OEMRC, EMAX, Lightening, The speed controllers "The Don" sells are Hobbywing's.

Hope you can help you know more about hobbywing product.

Full Range of Hobbywing Product available at HobbyHot.com
http://www.hobbyhot.com/HOBBYWING/
Hobbywing Xerun Series

2012年3月5日星期一

review of the Hobbywing Xerun 80A

source: http://traxxas.com/forums/showthread.php?508861-Xerun-80A-Review

Hey guys and gals,

Thought I'd post an actual review of the Hobbywing Xerun 80A since i couldn't find many reviews on this ESC when I was considering ordering one.

First impressions: Excellent packaging, thorough instructions. The unit looks pretty cool with the shiny blue-ness going on. It came pre wired in the package with two Deans type plugs wired in series, and 4mm bullet connectors for the motor connection. In the package they also included mounting screws and double sided mounting tape for the controller and the switch, stickers, and heat shrink tubing.

Mounting in E-Revo: This is the part that surprised me - the mounting holes line up PERFECTLY with the E-Revo mounting holes! maybe that's just the industry standard size, but it seems to me that maybe the Hobbywing folks were targeting us E-Revo owners from the start on this thing. I took the bait and I'm glad I did.

Set up: I just ran it with the factory settings, and set up is really simple. I'm running it with a cheapo Hobby King 1900 KV 9XL motor, geared 17/65 on 2 2s zippy 4000 25C packs, wired in series. I noticed absolutely no cogging at all at low speeds. The power band is pretty linear and smooth, with a slight jump at about 80% throttle when it jumps into warp speed - this could probably be programmed out with the programmer box, which I'll purchase later. The only minor complaint I have is that the reverse delay is really short - we're talking milliseconds - on the factory settings. So, when you hit the brakes it almost immediately goes into reverse instead of holding the brakes for a few seconds. Again, probably something that can be dialed out with the programmer box.

Overall I'm very impressed and pleased with the purchase. If you're satisfied with 4s speed and power (so far I definitely am, HUGE improvement over the double brushed setup) then I wouldn't hesitate to recommend this setup. I don't have much wheel time on this setup yet, but as I get more I'll update the post. Chime in if you have questions - thanks for reading!

Mike

2012年3月3日星期六

Hobbywing Manual Download

HOBBYWING Manuals for Download (PDF format)
R/C manuals for major HOBBYWING items are available for download. Please note that downloadable files may not be altered, resold or distributed without permission.

HOBBYWING Manuals of Airplane ESC
Manual of Platinum Series Airplane ESC
Platinum-40A, 60A, 80A, 100A, 180A-OPTO, 70A-HV, 120A-HV

Manual of FlyFun Series High-Voltage (>6S Lipo) Airplane ESC
FlyFun-80A-HV, 100A-HV

Manual of FlyFun Series (<= 6S Lipo) Airplane ESC
FlyFun-6A,10A, 12AE, 18A, 30A, 40A, 60A, 80A, 100A

Manual of SkyWalker Series Airplane ESC
SkyWalker-6A,12A, 12AE, 20A, 40A, 40A-UBEC, 70A-UBEC

Manual of Eagle Series Brushed Airplane ESC
Eagle-20A, 30A

HOBBYWING Manuals of Car ESC
XERUN Series: Manual of XERUN-120A-SD (V2.1) and XERUN-60A-XD (V2.1)
XERUN-120A-SD (V2.1), XERUN-60A-SD (V2.1)

XERUN Series: Manual of XERUN-120A-1S-SD
XERUN-120A-1S-SD

XERUN Series: Manual of Xtreme Stock ESC
XTREME STOCK ESC

XERUN Series: Manual of Justock Spec ESC
JUSTOCK SPEC ESC

XERUN Series: Manual of XERUN-SCT-PRO
XERUN-SCT-PRO

XERUN Series: Manual of XERUN-150A-SD and XERUN-80A-SD
XERUN-150A-SD, XERUN-80A-SD

XERUN Series: Manual of Super Stock Firmware (110119_Stock) for 1/10 scale Competition
XERUN-120A-SD (V2.1), XERUN-60A-SD (V2.1)
XTREME STOCK

XERUN Series: Manual of Super Stock Firmware (110211_Stock) for 1/10 scale Competition
XERUN-120A-SD (V2.1), XERUN-60A-SD (V2.1)
XTREME STOCK

EZRUN Series: Manual of EZRUN-18A, EZRUN-25A, EZRUN-35A, EZRUN-60A
EZRUN-18A, EZRUN-25A, EZRUN-35A, EZRUN-60A

EZRUN Series: Manual of EZRUN-SC10, EZRUN-SC8
EZRUN-SC10, EZRUN-SC8

EZRUN Series: Manual of EZRUN-150A-PRO
EZRUN-150A-PRO

HOBBYWING Manuals of Boat ESC
Manual of SeaKing Series Boat ESC
SeaKing-25A, 35A, 60A, 90A, 120A, 180A, 80A-HV, 130A-HV

HOBBYWING Manuals of Accessories
Manual of 3A UBEC
UBEC-3A

Manual of 5A-HV UBEC
UBEC-5A-HV

Manual of 8A UBEC
UBEC-8A

Manual of Professional LCD Program Box
Professional LCD Program Box

Manual of LED Program Box
LED Program Box

Manual of LED Program Card
LED Program Card

Manual of Multi-Function LiPo Battery Protector
Multi-Function LiPo Battery Protector

Manual of V-Tail Mixer
V-Tail Mixer

Manual of G3 Advance Gyro
G3 Advance Gyro

HOBBYWING Manuals of USB Link Software
User Manual of USB Link Software
Hobbywing USB Link Software